PayPal Acceptance Mark

WWW.TORCHTOOLS.COM
U.S. Patent Numbers 6,976,502, 7,588,276, 8,371,629, 9,027,785 & Other Patents Pending

In Loving Remembrance
Warren A. Bibow
5/30/1932 - 8/7/2017  

      SSL

Search by part number: VICTOR®, TurboTorch®, Uniweld®, GOSS®, Harris®, Smith®, GENTEC®, Worthington®, Lenox®, ESAB®
 or search by expression: welding tips, air acetylene kits, torch handles...
 

Home
Plumbing HVAC Equipment
B-Tank Tools
B-Tank Handles
B-Tank Organizer
B-Handle Hooks
B-Tank Holder
Steel Tank Holders
B-Tank Regs
MC-Tank Tools
MC-Tank Organizer
MC-Tank Holder
Reg Upgrade Kits
Elite Prem Air Fuel Kits
BEBO Elite Air Acet Torch Kits
BEBO Premium Air Acet. Torch Kits
KA14BSP
KA11BSP
KA8BSP
KA5BSP
KASL5BSP
KASL8BSP
KASL12B
KA8MC-TSP
KA8MCSP
KA5MCSP
KASL5MCSP
KASL8MCSP
HGA-012A
Air Acetylene Tips
Swirl Flame Quick-Connect Tips
6Q-2TA
6Q-3TA
6Q-3TAC
6Q-5TA
6Q-8TA
6Q-11TA
6Q-14TA
5TEA
Air-Acetylene Auto Ignite Tips
6Q-3TASL
6Q-5TASL
6Q-8TASL
6Q-12TASL
Air Acet Screw-Connect Swirl Flame Tips
7S-3TA
7S-5TA
7S-8TA
7S-11TA
Air Acet Soft Flame Quick Connect Tips
6Q-1SA
6Q-2SA
6Q-3SA
6Q-4SA
6Q-5SA
6Q-6SA
Soft Flame Screw Connect Tips
7S-1SA
7S-2SA
7S-3SA
7S-4SA
7S-5SA
7S-6SA
KPSL3SP
KPSL4SP
KPSL5SP
Air MAPP Quick-Connect Swirl Flame Tips
HGP-012
6Q-2TP
6Q-3TP
6Q-4TP
6Q-5TP
6Q-6TP
Air Propane Quick-Connect Tips
Air Propylene Quick Connect Tips
Air MAPP Screw Connect Tips
7S-2TP
7S-3TP
7S-4TP
7S-5TP
8Q-44TP
KP4SP
KP5SP
KP6SP
Air MAPP Torch Kits
Air Propane Torch Kits
BBQ Propane Torch Tools
Air-Propane Auto Ignite Tips
6Q-3TPSL
6Q-4TPSL
6Q-5TPSL
Air-MAPP Auto Ignite Tips
Air Propane Screw-Connect Tips
Air MAPP Tips
Air Propane Tips
Air Gas Torch Handles
Air Acetylene Torch Handle
Air Propane Torch Handles
Air MAPP Torch Handles
7LBS MAPP Tank Torch Tools
Swivel Torch Kit
KPSL3SW-FSP Swivel Torch
KPSL4SW-FSP Swivel Torch
KPSL5SW-FSP Swivel Torch
Hand Torch Belt Clip
Nitrogen Carry Handles
Nitrogen Tank Tools
Nitrogen Tank Holders
Nitrogen Purge Tools
C02 Tank Tools
C02 Purge Tools
Oxygen Tank Tools
Oxygen Tank Carry Handles
Hand Torches
Nitrogen Purge Kits
N2 Tire Inflation Kits
GKNT
GKNT-NT
GKNT20-T
GKNT40-T
GKNT20-NT-C
GKNT20-TC
GKNT40-NT-C
GKNT40-TC
AirCraft Tire Inflation
Nitrogen Aircraft Tire Inflation
HVAC Oxy-Acet Torch Kits
GF11
GF22
HVAC Oxy-Fuel Torch Kits
KA30MC
KA30MC-T
KA30MC-TC
KM50-T
KP50-T
KA50
KA50-T
KA50-TC
KA51
KA51-T
CRT10
Totemate
Plg HVAC Regs
Plbg HVAC Access
Welding Equipment
Welding Regs
Air Regulators
Oxygen Regulators
Acetylene Regulators
Methane Regulators
Propane Regulators
LP Regulators
Hydrogen Regulators
Nitrogen Regulators
Butane Regulators
C02 Regulators
Argon Regulators
Helium Regulators
Insert Gas Regulators
Other Gas Regulators
Gauge Protected Regulators
Gauge Protectors
Station, Pipeline, Manifold, Flow Gauge, Flow Meter, Balloon Gas Regulator
Reg. Inlets & Outlets
CGA ADAPTERS
Pressure Gauges
G20 Gauges
G20B Gauges
Compact Torch
KCMA16TCSP
KCMA16SP
KCMA16-BSP
KCMP16SP
KCMA26SP
KCMA04SP
Compact Tips
10CMP 3-7
10CMP-GMTT
10CMP-GMTR
Jewelry Torches
Jewelry Tips
Glass Blowing Tips
Jewelry Torch Kit Components
Glass Blowing Kit Components
Small Torch Kits
Small Torch Components
Small Torch Tips
Mul-T-Torch
WB-500T
ICE MELTING TORCH
Snow Melting Torch
Check Valves
24-CV5PR
24-CV5TO
24-CV5TF
24-CV7PR
24-CV7TO
24-CV7TF
24-CV8PR
24-CV8RO
24-CV8RF
24-CV9PR
24-CV9RO
24-CV9RF
FlashBack Arrestors
FA5TPR
FA7TPR
Quick Connectors
KOIKE Quick Connectors
Hose-To-Torch
QC-HTPR
QC-HTF
QC-HTX
QC-HTF-M
QC-HTF-F
QC-HTX-M
QC-HTX-F
Regulator-To-Hose Quick Connectors
QC-RHPR
QC-RHF
QC-RHX
QC-RHF-M
QC-RHF-F
QC-RHX-M
QC-RHX-F
Hose-To-Hose Quick Connectors
QC-HHPR
QC-HHF
QC-HHX
QC-HHF-M
QC-HHF-F
QC-HHX-M
QC-HHX-F
Gold Torch Kits
1120 Jobber Torch
1120FA Jobber
1121 Jobber II Torch Kit
1121FA Jobber Torch Kit
1138 Iron Horse Torch Kit
1138FA Iron Horse Torch Kit
1130 Commander Torch Kit
1130FA Commander Torch Kit
1131 Commander II Torch Kits
1131FA Commander II Torch Kit
4121 Excalibur Torch Kit
4121FA Excalibur Torch Kit
4131 Boss Torch Kit
4131FA The Boss Torch Kit
Tote-A-Torch Kits
12PT Tote-A-Torch
12PTC Tote-A-Torch Kit
Silver Torch Kits
Packaged Welding  Cutting Torch Kits
Scrapper Cutting Torch
13-OS Torch
63L-4 Torch
63L-5 Torch
63L-4 / 63L-5
ScrapMaster Cutting Torch
Gas Savers
100QF-Y Gas Saver
100QF-F Gas Saver
Torch Handles
140T
141T
142T
143T
143TL
143TLH
342T-Y
342T-F
442T
443T
140T Parts
141T Parts
141TA Parts
142T Parts
142TA Parts
143T Parts
143TL Parts
143TLH Parts
161S Parts
162 Parts
163 Parts
Cut Attachments
141C
142C
143CA
143ACA
143SCA
442C
443C
Hand Cutting Torches
161S-17
162S-17
Sm. Weld Cart
Lg Weld Cart
Heating Nozzels
171H Nozzles
171H-2
171H-4
171H-6
172H Nozzles
172H-2
172H-4
172H-6
172H-8
173H Nozzles
173H-4
173H-6
173H-8
173H-10
173H-12
173H-15
871H-873H Nozzles
871H Nozzle
872H Nozzle
873H Nozzle
171HN-173HN Nozzles
171HN Nozzle
172HN Nozzle
173HN Nozzle
175HN Nozzle
Welding Tips
Uniweld 71 Tips
Uniweld Type 17
171W Tips
171W-000
171W-00
171W-0
171W-1
171W-2
171W-3
171W-4
171W-5
171W-6
172W Tips
172W-000
172W-00
172W-0
172W-1
172W-2
172W-3
172W-4
172W-5
172W-6
173W Tips
173W-000
173W-00
173W-0
173W-1
173W-2
173W-3
173W-4
173W-5
173W-6
173W-8
173W-10
871W Elbows
872W Elbows
873W Elbows
472W Elbows
172WRTEN
173WRTE Nozzle
173WTREN
Special Braze Nozzles
GMTW
GMTW-1
GMTW-2
GMTT
GMTR
G17-VMA-1
G17-FT Tip
G13-8VM
G17 Multi Gas Nozzles
881W-883W Elbows
881W
881W-TT
882W
883W
Gas MIXERS
871M, 872M, 873M Mixers
871M Mixer
871M-7 Mixer
872M Mixer
872M-7 Mixer
873M Mixer
873M-4 Mixer
873M-6 Mixer
873M-10 Mixer
883TE Tip Ends
883TE-00
883TE-0
883TE-1
883TE-2
883TE-3
883TE-4
883TE-5
883TE-6
00-TE VICTOR
0-TE VICTOR
1-TE VICTOR
2-TE VICTOR
3-TE VICTOR
4-TE VICTOR
5-TE VICTOR
6-TE VICTOR
883TEMFA Tip Ends
883TEMFA-1
883TEMFA-2
883TEMFA-3
883TEMFA-4
883TEMFA-5
883TEMFN-5
VICTOR 5-TEMFN
1-TEMFA
2-TEMFA
3-TEMFA
4-TEMFA
5-TEMFA
VICTOR TEN Tip Ends
VICTOR 0-TEN
VICTOR 1-TEN
VICTOR 2-TEN
VICTOR 3-TEN
VICTOR 4-TEN
VICTOR 5-TEN
VICTOR 6-TEN
VICTOR 8-TEN
883TEN Tip Ends
Cutting Tips
VICTOR 1-101
172C Tips
173C Tips
VICTOR 3-101
Gentec 172C
VICTOR 3-GPN
172CN
VICTOR 0-3-GPP
VICTOR 1-3-GPP
VICTOR 2-3-GPP
VICTOR 3-GPP
172CP
173C
VICTOR GPN
173CN
VICTOR GPP
VICTOR 00-GPP
VICTOR 0-GPP
VICTOR 1-GPP
VICTOR 2-GPP
VICTOR 3-GPP
VICTOR 4-GPP
173CP
VICTOR GPM
VICTOR 0-GPM
VICTOR 1-GPM
VICTOR 2-GPM
Gentec 173CM
173CM-0
173CM-1
173CM-2
VICTOR Scarfing Gouging Tips
VICTOR 2-3-118
VICTOR 0-1-118
VICTOR 2-1-118
VICTOR 4-1-118
VICTOR 2-1-234
Gentec Scarfing-Gouging Tips
172CG-2
173CG-0
173CG-2
173CG-4
173CGN-2
VICTOR High Speed Machine  Cutting Tips
VICTOR MTHP Cutting Tips
Uniweld MTHP Cutting Tips
VICTOR MTHN Cutting Tips
Gentec High Speed Machine Cutting Tips
173CHP
173CHN
HS Cutting Tips
Harris 6290
6290-000
6290-00
6290-0
6290-1
6290-2
6290-3
6290-4
6290-5
6290-6
472C
472C-000
472C-00
472C-0
472C-1
472C-2
472C-3
472C-4
472C-5
472C-6
HARRIS 6290NX
6290NX-000
6290NX-00
6290NX-0
6290NX-1
6290NX-2
6290NX-3
6290NX-4
6290NX-5
6290NX-6
472CN
472CN-000
472CN-00
472CN-0
472CN-1
472CN-2
472CN-3
472CN-4
472CN-5
472CN-6
Harris 6290-VVC
6290-0 VVC
6290-1 VVC
6290-2 VVC
6290-3 VVC
6290-4 VVC
144 164 Concoa Airco Tips
144 Concoa AIRCO Cutting Tips
164 Concoa AIRCO Cutting Tips
672C Cutting Tip
673C Cutting Tips
KOIKE AIRCO High Speed Machine Cutting Tips
107D7 KOIKE AIRCO Cutting Tips
106D7 KOIKE AIRCO Cutting Tips
672CHN
673CHNP
Smith Cutting Tips
572C Cutting Tips
572CN Cutting Tips
573C Cutting Tips
ESAB 4202 Cutting Tip
Purox 16K Cutting Tip
Uniweld 4202
772C Cutting Tips
4202-2 PUROX
4202-4 PUROX
4202-6 PUROX
Machine Torches
MC300
MC200
MC100
EZ Arc Positioners
Positioners
Welding Hoses
Hose Fittings, Ferrules, Braces
Welding Accessories
Arc Welding Accessories
Ballon Filler Regulators
Ballon Reg Parts
Scuba Tank Handles
02-Mate
New Product
U.S. Military Services
Torch Repair
Gentec Catalogs
PRIVACY POLICY
DISTRIB. TERMS
About Us
TradeShows
Contact US
Special Orders
Terms Of Use
SEARCH
Site Map

-NEW PRODUCT NEWS-

 

GENTEC Acetylene Welding Regulators: Single-stage, Two-stage, Light-Medium-Heavy Duty

Gentec® Welding: ACETYLENE regulators are manufactured using state-of-the-art equipment.  They are produced, assembled, and tested by an experienced, proud, and dedicated work force that is committed to the highest standards of product integrity.  They are suitable for a variety of gas pressure reduction and control requirements such as welding, cutting, heating, and brazing.

Single-Stage Regulators:
Gentec®
190 Series: Single-Stage Acetylene Regulators:


Gentec® 190 Series

With lightweight, compact and single stage design, they are ideal for light to medium duty gas welding, cutting and heating applications.

  • Body is machined from class "A" brass bar stock
  • Chrome plated housing cap
  • Internal safety pressure relief valve
  • Sintered bronze inlet filter
  • Stem type seat assembly for more reliable seating
  • 2" gauges for easy reading
  • 1-1/4" diaphragm
  • Weight: 2 lbs 1 oz
  • UL Listed
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
190Y-15 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 510 9/16"-18LH(M)
190Y-15-3 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
190Y-15-5 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 520 9/16"-18RH(M)

1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 190Y-15 GENTEC® Single Stage Light Duty Acetylene Regulator CGA510 = $99 +S&H
Gentec® 190Y-15 equivalent to CutSkill® SR6-15-510
Gentec
® 190Y-15 equivalent to FirePower® 150-15-510
Gentec
® 190Y-15 equivalent to Harris® 301-15-510
Gentec
® 190Y-15 equivalent to Smith Equipment® H1945E-510
Gentec® 190Y-15 equivalent to Uniweld® MR8211
Gentec® 190Y-15 equivalent to VICTOR® SR6-15-510
Gentec® 190Y-15 equivalent to Western Enterprise® REB-1-1

BUY 190Y-15-3 GENTEC® Single Stage, Light Duty Acetylene Regulator CGA300 = $105 +S&H
Gentec® 190Y-15-3 equivalent to  Harris® 301-15-300
Gentec
® 190Y-15-3 equivalent to  Smith Equipment® H1942E-300
Gentec
® 190Y-15-3 equivalent to  Uniweld® MR8211-1
Gentec
® 190Y-15-3 equivalent to  VICTOR® SR6-15-300
Gentec® 190Y-15-3 equivalent to  Western Enterprise® REB-1A-1

BUY 190Y-15-5  Single Stage, Light Duty Acetylene Regulator CGA520 = $105 + S&H
Gentec® 190Y-15-5 equivalent to Harris® 301-15-420B
Gentec
® 190Y-15-5 equivalent to Smith Equipment® H1941E-520
Gentec® 190Y-15-5 equivalent to Uniweld® MR8211-2
Gentec® 190Y-15-5 equivalent to VICTOR® SR6-15-520

Gentec® 210 Series Single-Stage Acetylene Regulators:

        
Gentec® 210 Series                                   Gentec® 210Y-15G

Featuring a compact rear entry design to meet the demands of special installation, these regulators are best for light to medium duty gas welding, cutting and heating applications, such as industrial maintenance, farm and shop repair, hobby, crafts and home care.

  • Rear entry inlet construction
  • Body is machined from class "A" brass bar stock
  • Chrome-plated housing cap
  • Internal safety pressure relief valve
  • Sintered bronze inlet filter
  • Stem type seat assembly for more reliable seating
  • Plastic adjustment knob for smooth "easy touch" pressure setting
  • 2" gauges for easy reading,  210 Series has two (2) gauges and 210Y1 Series has one (1) gauge (inlet gauge) only
  • 1-1/4" diaphragm
  • Rubber gauge protectors are color coded: green for Oxygen (GP20X) and red for Acetylene (GP20Y)
  • Weight:   210 Series: 2 lbs. 3 oz,  210Y1 Series 1 lbs. 14oz
  • UL Listed

MODEL #
 
GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
210Y-15 Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA200 "MC" Rear 9/16"-18LH(M)
210Y-15G Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA200 "MC" Rear 9/16"-18LH(M)
210Y-15-5 Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA520 Rear 9/16"-18LH(M)
210Y-15-A Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA 200 "MC" Rear 3/8"-24LH(M)
210Y-15-510 Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA510  Rear 9/16"-18LH(M)
210Y-15-510-A Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA 510  Rear 3/8"-24LH(M)
210Y-15-3 Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA 300  Rear 9/16"-18LH(M)
210Y-15-3-A Acetylene 400 2 - 15 2", 400 PSI 2", 30 PSI, RL CGA 300  Rear 3/8"-24LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2,  1 SCFH = 0.0283 m3/h = 0.472 LPM

 

BUY 210Y-15 single stage, light duty Acetylene regulator, "MC" Rear Entry, CGA-200 nut = $100 +S&H
Gentec® 210Y-15 equivalent to Smith Equipment® H1944F-200
 Gentec® 210Y-15 equivalent to CutSkill® HSR6-15-200R
 Gentec® 210Y-15 equivalent to FirePower® FPR-160AR-200
Gentec® 210Y-15 equivalent to Uniweld RMC2B
Gentec
® 210Y-15 equivalent to VICTOR® SR160AR-200

BUY 210Y-15G single stage, light duty Acetylene reg, "MC" Rear Entry, CGA-200 nut-with gauge guard = $115 +S&H
Gentec® 210Y-15G = Smith Equipment® H1944F-200 -- All below with gauge protectors
 Gentec® 210Y-15G equivalent to CutSkill® HSR6-15-200R
 Gentec® 210Y-15G equivalent to FirePower® FPR-160AR-200
Gentec® 210Y-15G equivalent to Uniweld® RMC2B
Gentec
® 210Y-15G equivalent to VICTOR® SR160AR-200

BUY 210Y-15-A single stage, light duty Acetylene reg, "MC" Rear Entry, CGA-200 nut "A" = $100 +S&H
Gentec® 210Y-15 equivalent to Uniweld® RMC2

BUY 210Y-15-15 single stage, light duty Acetylene regulator, "MC" Rear Entry, CGA-510 nut = $100 +S&H
Gentec® 210Y-15-15 equivalent to Smith Equipment® H1941E-520

BUY 210Y-15-510A single stage, light duty Acetylene regulator, Rear Entry, CGA-510 nut "A" = $100 +S&H
Gentec® 210Y-15-510-A equivalent to Uniweld® RW

BUY 210Y-15-510B single stage, light duty Acetylene regulator, Rear Entry, CGA-510 nut "B" = $100 +S&H
Gentec® 210Y-15-510B equivalent to Uniweld® RWB

BUY 210Y-15-300A single stage, light duty Acetylene regulator, Rear Entry, CGA-300 nut "A"= $100 +S&H
Gentec® 210Y-15-300A equivalent to Uniweld® RCA

BUY 210Y-15-300B single stage, light duty Acetylene regulator, Rear Entry, CGA-300 nut "B" = $100 +S&H
Gentec® 210Y-15-3B equivalent to Uniweld® RCAB



Gentec®
210Y1 Series Single-Stage Acetylene Regulators:

                                              

Gentec® 210Y1-15-M                                                             Gentec® 210Y1-15-B   

Featuring a compact rear entry design, these regulators are designed for light to medium duty gas welding and brazing applications.

  • Rear entry inlet construction
  • Body machined from class "A" brass bar stock
  • Chrome plated housing cap
  • Internal pressure relief valve
  • Sintered bronze inlet filter
  • Stem type seat assembly for more reliable seating
  • Plastic adjustment knob for smooth "easy touch" pressure settings
  • 2" gauges for easy reading
  • 210 Series has two (2) gauges and 210Y1 Series has one (1) gauge (inlet gauge) only
  • 1-1/4" diaghragm
  • Weight:   210 Series 2 lbs 3 oz., 201Y1 Series: 1 lbs. 14 oz
  • UL Listed
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
210Y1-15-B Acetylene 400 2 - 15 2", 400PSI None CGA520 "B" Rear 9/16"-18LH(M)
210Y1-15-M Acetylene 400 2 - 15 2", 400PSI None CGA200 "MC" Rear 3/8"-24LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2,  1 SCFH = 0.0283 m3/h = 0.472 LPM
 

BUY 210Y1-15-B single stage light duty Acetylene reg, Rear Entry "B-Tank Nut" CGA-520 = $95 +S&H
"Has 1 pressure gauge"

BUY 210Y1-15-M single stage light duty Acetylene regulator, Rear Entry "MC-Tank Nut" CGA-200  = $95 +S&H
"Has 1 pressure gauge"
Gentec® 210Y1-15-M equivalent to Uniweld® RMC

Gentec® 152 Series, Single-Stage Acetylene Regulators:

          


Gentec® 152 Series                     Gentec® 152Y-15G     
                                                       Gentec® 152Y-15-3G
                                                       Gentec® 152Y-15-5G

Designed for medium duty gas welding, cutting and heating applications, these regulators are ideal for industrial application, farm repairs and laboratory testing, etc.

  • Forged brass body and housing cap

  • Delrin cap bushing for smooth adjustments

  • Self re-seating external safety pressure relief valve on oxygen, inert gas and air models

  • Sintered bronze inlet filter

  • Stem type seat assembly for more reliable performance

  • 2" gauges for easy reading

  • 2" diaphragm

  • Steel Gauge Protectors are color coded, green for Oxygen (GP21X) and red for Acetylene (GP21Y)

  • Weight: 2 lbs 11 oz

  • UL Listed

MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
152Y-15 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 510 9/16"-18LH(M)
152Y-15G Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 510 9/16"-18LH(M)
152Y-15-3 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
152Y-15-3G Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
152Y-15-5 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 520 9/16"-18LH(M)
152Y-15-5G Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 520 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 152Y-15 Single Stage Medium-Duty Acetylene Regulator CGA510 nut = $125 +S&H
Gentec® 152Y-15 equivalent to CutSkill® RC250-15-510
Gentec® 152Y-15 equivalent to FirePower® 250-15-510-FB
Gentec® 152Y-15 equivalent to Harris® 2500-15-510
Gentec® 152Y-15 equivalent to Smith Equipment® H1721C-510
Gentec® 152Y-15 equivalent to VICTOR® SR260A-510

BUY 152Y-15G Single Stage Medium-Duty Acetylene Regulator CGA510-with gauge protector = $145 +S&H
Gentec® 152Y-15G = CutSkill® RC250-15-510 - All of these with gauge protectors
Gentec® 152Y-15G equivalent to FirePower® 250-15-510-FB
Gentec® 152Y-15G equivalent to Harris® 2500-15-510
Gentec® 152Y-15G equivalent to Smith Equipment® H1721C-510
Gentec® 152Y-15G equivalent to VICTOR® SR260A-510

BUY 152Y-15-3 Single Stage Medium-Duty Acetylene Regulator CGA300 = $132 +S&H
Gentec® 152Y-15-3 equivalent to CutSkill® RC250-15-300
Gentec® 152Y-15-3 equivalent to FirePower® 250-15-300-FB
Gentec® 152Y-15-3 equivalent to Harris® 2500-15-300
Gentec® 152Y-15-3 equivalent to Smith Equipment® H1720C-300
Gentec® 152Y-15-3 equivalent to VICTOR® SR260A-300

BUY 152Y-15-3G Single Stage Medium-Duty Acetylene Regulator CGA300-with gauge protector = $148 +S&H
Gentec® 152Y-15-3G = CutSkill® RC250-15-300 - All of these with gauge protectors
Gentec® 152Y-15-3G equivalent to FirePower® 250-15-300-FB
Gentec® 152Y-15-3G equivalent to Harris® 2500-15-300
Gentec® 152Y-15-3G equivalent to Smith Equipment® H1720C-300
Gentec® 152Y-15-3G equivalent to VICTOR® SR260A-300

BUY 152Y-15-5 Single Stage Medium-Duty Acetylene Regulator CGA520 = $132 +S&H
Gentec® 152Y-15-5 equivalent to VICTOR® SR260A-520

BUY 152Y-15-5G Single Stage Medium-Duty Acetylene Regulator CGA520-with gauge protector = $148 +S&H
Gentec® 152Y-15-5G equivalent to VICTOR® SR260A-520 - with gauge protectors

Gentec® 153 Series,  Single-Stage Acetylene Regulators:


Gentec® 153 Series

153 Acetylene single stage regulators designed for heavy duty gas welding, cutting & heating applications. Uses include steel, ship building, metallurgical and chemical industries, and laboratory, etc.

  • 2-1/2" gauges for easy reading
  • 3-1/4" stainless steel diaphragm for accurate pressure delivery
  • Delrin cap bushing for smooth adjustments
  • Stem type seat assembly for more reliable performance
  • Body and housing cap machined from class "A" brass bar stock
  • Self re-seating external pressure relief valve on oxygen, inert gas, air, CO2 and hydrogen models
  • Sintered bronze inlet filter
  • Weight: 4 lbs 13 oz
  • UL Listed
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
153Y-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
153Y-15G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
153Y-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
153Y-15-3G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM  

BUY 153Y-15 single stage medium-duty Acetylene Regulator CGA510 = $250 +S&H
Gentec® 153Y-15 equivalent to CutSkill® RC450-15-510
Gentec® 153Y-15 equivalent to Harris® 3500-15-510
Gentec® 153Y-15 equivalent to Smith Equipment® HB1521B-510
Gentec® 153Y-15 equivalent to Uniweld® RV8011
Gentec® 153Y-15 equivalent to VICTOR® SR460A-510
Gentec® 153Y-15 equivalent to Western Enterprise® RC-1-1

BUY 153Y-15G single stage medium-duty Acetylene Regulator CGA510-with gauge protector = $270 +S&H
Gentec® 153Y-15G = CutSkill® RC450-15-510 - these with gauge protector
Gentec® 153Y-15G equivalent to Harris® 3500-15-510
Gentec® 153Y-15G equivalent to Smith Equipment® HB1521B-510
Gentec® 153Y-15G equivalent to Uniweld® RV8011
Gentec® 153Y-15G equivalent to VICTOR® SR460A-510
Gentec® 153Y-15G equivalent to Western Enterprise® RC-1-1

BUY 153Y-15-3 single stage medium-duty Acetylene Regulator CGA300 = $250 +S&H
Gentec® 153Y-15-3 equivalent to CutSkill® RC450-300-15
Gentec® 153Y-15-3 equivalent to Harris® 3500-15-300
Gentec® 153Y-15-3 equivalent to Smith Equipment® HB1520B-300
Gentec® 153Y-15-3 equivalent to Uniweld® RV8011-1
Gentec® 153Y-15-3 equivalent to VICTOR® SR460A-300
Gentec® 153Y-15-3 equivalent to Western Enterprise® RC-1A-1

BUY 153Y-15-3G single stage medium-duty Acetylene Regulator CGA300-with gauge protector = $270 +S&H
Gentec® 153Y-15-3G = CutSkill® RC450-300-15 - these with gauge protector
Gentec® 153Y-15-3G equivalent to Harris® 3500-15-300
Gentec® 153Y-15-3G equivalent to Smith Equipment® HB1520B-300
Gentec® 153Y-15-3G equivalent to Uniweld® RV8011-1
Gentec® 153Y-15-3G equivalent to VICTOR® SR460A-300
Gentec® 153Y-15-3G equivalent to Western Enterprise® RC-1A-1



GENTEC® Gauge Protectors:
Designed for Industrial Gas Regulators.

         
GP21X -----Gauge Protector for
Oxygen 152X Series - GP152X and 752X
GP21Y-----Gauge Protector for
Acetylene 152Y Series - GP152Y and 752Y
GP31X------Gauge Protector for Oxygen  153X-125 - GP153X and 153TX
GP31Y-------Gauge Protector for Acetylene 153Y-15 and 153Y-15-3  - GP153Y and 153TY
GP32X------Gauge Protector for Oxygen  853X - GP853X, 753X and 453X
GP32Y-------Gauge Protector for  Acetylene 853Y  - GP853Y, 753Y and 453Y

  • Durable Metal Construction
  • Color Coded
  • Powder Coated Finish
  • Reduces potential damage to pressure gauges
  • Easy to install and remove from regulators
  • Use with GENTEC 153 series regulators
  • Regulators may be ordered with gauge protectors attached (see Items description below)
  • Interchangeable with other major brands

Note: Gauge Protectors are not designed to replace or alleviate the need for proper cylinder storage systems. Cylinders should always be used and stored in conjunction with local and OSHA requirements. Consult with your Safety Department or Cylinder Gas provider for additional information.

BUY GP21X Gauge Protector for Oxygen 152X Series - GP152X and 752X = $14 +S&H
Gentec® GP21X equivalent to VICTOR® 1429-0068

  BUY GP21Y Gauge Protector for Acetylene 152Y Series  - GP152Y and 752Y = $14 +S&H
Gentec® GP21Y equivalent to VICTOR® 1429-0069

BUY GP31X Gauge Protector for Oxygen, 153X-125 - GP153X and 153TX = $14 +S&H
Gentec® GP31X equivalent to VICTOR® 1429-0056

BUY GP31Y Gauge Protector for Acetylene 153Y-15 and 153Y-15-3 - GP153Y and 153TY = $14 +S&H
Gentec® GP31Y equivalent to VICTOR® 1429-0057

BUY GP32X Gauge Protector for Oxygen, 853X -GP853X , 753X and 453X  = $14 +S&H
Gentec® GP32X equivalent to VICTOR® 1429-0066

BUY GP32Y Gauge Protector for Acetylene 853Y -GP853Y, 753Y and 453Y = $14 +S&H
Gentec® GP32Y equivalent to VICTOR® 1429-0067

Gentec® Gas Savers:
Double Shutoff Valves with Pilot Flame are designed for quick shut-off and easy restart of the working flame during gas welding and cutting operation. The working flame is automatically extinguished and the gas flow discontinued by placing the torch handle on the convenient hook. To reignite the working flame, lift the torch handle from the hook and place the tip close to the pilot flame. Our Duel Shutoff Valves Assembly is convenient, safe and fuel-efficient.


Gentec® GAS SAVER
Model 100QF-Y - for
Acetylene
Model 100QF-F - for
Fuel

BUY 100QF-Y Gentec GAS SAVER for Acetylene (ONLY) = $105 +S&H

BUY 100QF-Y Gentec GAS SAVER for FUEL = $105 +S&H

Gentec® 155 Series, Acetylene Extra Heavy Duty


Gentec® 155 Series

Designed for heavy duty cutting, industrial applications, laboratory testing and manifold installations, etc.

  • Single stage construction
  • Body and housing cap
  • Delrin cap bushing for smooth adjustments
  • Self re-seating external pressure relief valve on oxygen, inert gas, air and hydrogen models
  • Sintered bronze inlet filter
  • 2-1/2" gauges for easy reading
  • 3-1/4" diaphragm
  • Weight: 7 lbs 10 oz
  • Conforms to CGA E-4 Standard for Gas Pressure Regulators
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
155Y-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 7/8"-14LH(M)
155Y-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 7/8"-14LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

 

BUY 155Y-15 single stage, extra heavy duty Acetylene regulator, CGA510 = $580 +S&H Insurance
Gentec® 155Y-15 equivalent to VICTOR® SR710A-510

BUY 155Y-15-3 single stage, extra heavy duty Acetylene regulator, CGA300 = $580 +S&H Insurance

Gentec® 452 Series Acetylene Regulators:



Gentec® 452 Series

452 Series single-stage acetylene regulators designed for medium to heavy duty gas welding, cutting, and heating applications, the "Horse" is a Harris­ style regulator with a 2-3/4" diaphragm and a Victor­ style seat mechanism. Truly a "Work Horse."

  • 2" gauges for easy reading
  • Stem type seat assembly for more reliable performance
  • Forged brass body
  • Chrome plated housing cap for fuel gas and oxygen models
  • Self re-seating external pressure relief valve on oxygen, inert gas, CO2 and nitrogen models
  • Sintered bronze inlet filter
  • Weight: 3 lbs
  • UL Listed
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
452Y-15 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 510 9/16"-18LH(M)
452Y-15-3 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
452Y-15-5 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 520 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 452Y-15 single stage, medium duty Acetylene regulator, CGA510 = $120 +S&H
Gentec® 452Y-15 equivalent to Harris® 25-15C-510
Gentec® 452Y-15 equivalent to Uniweld® RUH8211
Gentec® 452Y-15 equivalent to Western Enterprise® RS-1-1

BUY 452Y-15-3 single stage, medium duty Acetylene regulator, CGA300 = $120 +S&H
Gentec® 452Y-15-3 equivalent to Harris® 25-15C-300
Gentec® 452Y-15-3 equivalent to Uniweld® RUH8211-1
Gentec® 452Y-15-3 equivalent to Western Enterprise® RS-1A-1

BUY 452Y-15-5 single stage, medium duty Acetylene regulator, CGA520 = $120 +S&H
Gentec® 452Y-15-5 equivalent to Harris® 25-15C-250
Gentec® 452Y-15-5 equivalent to Uniweld® RUH8211-2

Gentec® 453 Series  Single-Stage Acetylene Regulators:

                                    
Gentec® 453 Series                              Gentec® 453Y-15G    
                                                                     Gentec® 453Y-15-3G       

Designed for medium to heavy duty gas welding, cutting and heating applications, these single stage regulators provide top performance in a wide variety of industrial and laboratory applications.

  • Steel Gauge Protectors are color coded, green for Oxygen (GP32X) and red for Acetylene (GP32Y)
  • Self re-seating external safety pressure relief valve on oxygen models
  • Conforms to CGA E-4 standard for gas pressure regulators
  • Stem type seat assembly for more reliable performance
  • Forged brass body and housing cap
  • 2-1/2" gauges for easy reading
  • 2-3/4" diaphragm
  • Weight: 3 lbs 8 oz
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
453Y-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
453Y-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
453Y-15G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
453Y-15-3G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 453Y-15 single stage, heavy duty Acetylene regulator, CGA510 = $163 +S&H
Gentec® 453Y-15 equivalent to Harris® 425-15-510

BUY 453Y-15G single stage, heavy duty Acetylene regulator, CGA510-with gauge protectors = $180 +S&H
Gentec® 453Y-15G equivalent to Harris® 425-15-510 - with gauge protectors

BUY 453Y-15-3 single stage, heavy duty Acetylene regulator, CGA300 = $163 +S&H
Gentec® 453Y-15-3 equivalent to Harris® 425-15-300

BUY 453Y-15-3G single stage, heavy duty Acetylene regulator, CGA300-with gauge protectors = $180 +S&H
Gentec® 453Y-15-3G equivalent to Harris® 425-15-300 - with gauge protectors

Gentec® 853 Series, Single Stage Acetylene Regulators:
 

                                                   
Gentec® 853 Series                                                Gentec® 853Y-15G               
                                                                       Gentec® 853Y-15-3
G

853 Series Single Stage Regulators - Designed for medium to heavy duty gas welding, cutting and heating applications, these single stage regulators provide top performance in a wide variety of industrial and laboratory applications.

  • Steel Gauge Protectors are color coded, green for Oxygen (GP32X) and red for Acetylene (GP32Y)
  • Self re-seating external safety pressure relief valve on oxygen models
  • Forged brass body and housing cap
  • Conforms to CGA E-4 standard for gas pressure regulators
  • Stem type seat assembly for more reliable performance
  • Delrin cap bushing for smooth adjustment
  • 2-1/2" gauges for easy reading
  • 2-3/4" diaphragm
  • Weight: 3 lbs 8 oz
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
853Y-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
853Y-15G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
853Y-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
853Y-15-3G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 853Y-15 single stage, medium-to-heavy duty Acetylene regulator, CGA510 = $189 +S&H Ins.
Gentec® 853Y-15 equivalent to CutSkill® RC350-15-510
Gentec® 853Y-15  equivalent to FirePower® 350-15-510-FB
Gentec® 853Y-15  equivalent to Smith Equipment® HB1520B-300
Gentec® 853Y-15 equivalent to Uniweld® RV8011-1
Gentec® 853Y-15 equivalent to VICTOR® SR360A-510

BUY 853Y-15G single stage, medium-to-heavy duty Acet reg, CGA510-with gauge protectors = $206 +S&H
Gentec® 853Y-15G = CutSkill® RC350-15-510 - these with gauge protectors
Gentec® 853Y-15G  equivalent to FirePower® 350-15-510-FB
Gentec® 853Y-15G  equivalent to Smith Equipment® HB1520B-300
Gentec® 853Y-15G  equivalent to Uniweld® RV8011-1
Gentec® 853Y-15G  equivalent to VICTOR® SR360A-510

BUY 853Y-15-3 single stage, medium-to-heavy duty Acetylene regulator, CGA300 = $189 +S&H
Gentec® 853Y-15-3 equivalent to CutSkill® RC350-15-300
Gentec® 853Y-15-3  equivalent to VICTOR® SR360A-300

BUY 853Y-15-3G single stage, med-to-heavy duty Acetylene reg, CGA300-with gauge protectors = $209 +S&H
Gentec® 853Y-15-3G equivalent to CutSkill® RC350-15-300- with gauge protector
Gentec® 853Y-15-3G  equivalent to VICTOR® SR360A-300 - with gauge protector

Two-Stage Regulators:
Gentec® 152T Series,
Two-Stage Acetylene Regulators:


Gentec® 152T, Two-Stage Series

Designed for medium duty gas welding, cutting and heating applications, these two-stage regulators provide precise and constant delivery over a wide range of inlet pressures. Ideal for laboratory, welding, cutting and many other applications.

  • Forged brass body nd housing cap
  • Delrin cap bushing for smooth adjustments
  • Self re-seating external safety pressure relief valve
  • Sintered bronze inlet filter
  • Stem type seat assembly for more reliable performance
  • 2" gauges for easy reading
  • 1-1/4" & 2" diaphragms
  • Steel Gauge Protectors are color coded, green for Oxygen (GP21X) and red for Acetylene (GP21Y)
                                                                                        
  • Weight: 4 lbs 10 oz
  • Conforms to CGA E-4 standard for gas pressure regulators
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
152TY-15 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 510 9/16"-18LH(M)
152TY-15-3 Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
152TY-15-3G Acetylene 400 2-15 2", 400PSI 2", 30PSI, RL CGA 300 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM
 

BUY 152TY-15 two-stage medium duty Acetylene regulator, CGA510 = $360 +S&H
Gentec® 152TY-15 equivalent to Uniweld® RHT8011
Gentec® 152TY-15 equivalent to VICTOR® VTS260A-510

BUY 152TY-15-3 two-stage medium duty Acetylene regulator, CGA300 = $360 +S&H
Gentec® 152TY-15-3 equivalent to Uniweld® RHT8011-1
Gentec® 152TY-15-3 equivalent to VICTOR® VTS260A-300

BUY 152TY-15-3G two-stage medium duty Acetylene regulator, CGA300-with gauge protectors = $380 +S&H
Gentec® 152TY-15-3G equivalent to Uniweld® RHT8011-1 - with gauge protector
Gentec® 152TY-15-3G equivalent to VICTOR® VTS260A-300 - with gauge protector

Gentec® 153T Series, Two-Stage Acetylene Regulators:

Gentec® 153T, Two-Stage Series

Designed for heavy duty gas welding, cutting and heating applications, these two-stage regulators provide precise and constant delivery over a wide range of inlet pressures. Ideal for laboratory, welding, cutting and many other applications.

  • Forged brass body and housing cap
  • Delrin cap bushing for smooth adjustments
  • Self re-seating external safety pressure relief valve
  • Sintered bronze inlet filter
  • Steel Gauge Protectors are color coded, green for Oxygen (GP21X) and red for Acetylene (GP21Y)
  • Stem type seat assembly for more reliable seating
  • 2-1/2" gauges for easy reading
  • 2" and 3-1/4" diaphragms
  • Weight: 7 lbs 6 oz
  • Conforms to CGA E-4 standard for gas pressure regulators
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
153TY-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 9/16"-18LH(M)
153TY-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
153TY-15-3G Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 300 9/16"-18LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 153TY-15 two-stage medium duty Acetylene regulator, CGA510 = $400 +S&H
Gentec® 153TY-15 equivalent to Harris® 9200NC-15-510
Gentec® 153TY-15 equivalent to Smith Equipment® H1421B-510
Gentec® 153TY-15 equivalent to Uniweld® RVT8011
Gentec® 153TY-15 equivalent to VICTOR® VTS460A-510
Gentec® 153TY-15 equivalent to Western Enterprise® RD-1-1

BUY 153TY-15-3 two-stage medium duty Acetylene regulator, CGA300  = $400 +S&H
Gentec® 153TY-15-3 equivalent to Harris® 9200NC-15-300
Gentec® 153TY-15-3 equivalent to Smith Equipment® H1420B-300
Gentec® 153TY-15-3 equivalent to Uniweld® RVT8011-1
Gentec® 153TY-15-3 equivalent to VICTOR® VTS460A-300
Gentec® 153TY-15-3 equivalent to Western Enterprise® RD-1A-1

BUY 153TY-15-3G two-stage medium duty Acetylene reg, CGA300, with gauge protectors  = $420 +S&H
Gentec® 153TY-15-3G equivalent to Harris® 9200NC-15-300
Gentec® 153TY-15-3G equivalent to Smith Equipment® H1420B-300
Gentec® 153TY-15-3G equivalent to Uniweld® RVT8011-1
Gentec® 153TY-15-3G equivalent to VICTOR® VTS460A-300
Gentec® 153TY-15-3G equivalent to Western Enterprise® RD-1A-1

Gentec® 155T Series, Two-Stage, Acetylene Extra Heavy Duty

155TX-200
Gentec® 155T, Two-Stage Series

155T series are two stage extra heavy duty models designed for heavy duty applications where precise and constant outlet pressures are required. Ideal for laboratory testing and manifold installations and many other industrial applications.

  • Dual-stage construction
  • Forged brass body and housing cap
  • Delrin cap bushing for smooth adjustments
  • Self re-seating external safety pressure relief valve
  • Sintered bronze inlet filter
  • 2-1/2" gauges for easy reading
  • 2" and 3-1/4" diaphragms
  • Weight: 8 lbs 8 oz
  • Conforms to CGA E-4 standard for gas pressure regulators
MODEL # GAS SERVICE MAXIMUM INLET PRESSURE (PSI) MAXIMUM DELIVERY PRESSURE (PSI) INLET GAUGE OUTLET GAUGE INLET CONNECTION OUTLET CONNECTION
155TY-15 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 30PSI, RL CGA 510 7/8"-14LH(M)
155TY-15-3 Acetylene 400 2-15 2-1/2", 400PSI 2-1/2", 200PSI CGA 300 7/8"-14LH(M)
1 psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar = 0.07 kgf / cm2, 1 SCFH = 0.0283 m3/h = 0.472 LPM

BUY 155TY-15 two-stage medium duty Acetylene regulator, CGA510  = $795 +S&H
Gentec® 155TY-15 equivalent to VICTOR® VTS710A-510

BUY 155TY-15-3 two-stage medium duty Acetylene regulator, CGA300  = $795 +S&H
Gentec® 155TY-15-3 equivalent to VICTOR® VTS710A-300

  Third Party Trademark & Brand Notice

* Equivalency data: 2008 - 2013 Gentec HVAC, Plumbing, Welding Catalogues

Contact sales@torchtools.com or call us at (516)-695-5696 Mon - Fri 7am - 5pm NY EST

Hit Counter


PayPal Acceptance Mark
 
SSL

Terms Of Use   Privacy Policy  Third Party Trademark & Brand Notice   Site Map
<script type="text/javascript" src="https://cdn.ywxi.net/js/1.js" async></script>


Listed 3rd party registered trademarks and trademarks are property of their trademark and copyright owners and are not associated with WWW.TORCHTOOLS.COM, Bibow Industries Inc., or Genstar Technologies and any and all subsidiaries thereof.  Please see 3rd party trademark, brand notice.
 * or "=" or " = to" means "equivalent to" and/or "compatible to" as determined by Genstar Technologies and not WWW.TORCHTOOLS.COM or Bibow Industries, Inc.
"=" equivalent to (and/or) compatible to: sources from public Gentec product catalogues and www.genstartech.com
Gentec part # = competitor torch manufacturer part # © ™ 2004-2014
= to © ™ Bibow Industries, Inc. TORCHTOOLS 2003-2014
ALL RIGHTS, ALL TRADE DRESS, ALL COLOR SCHEMES RESERVED 2003-2014 © ™
Copyright © 2003-2014 WWW.TORCHTOOLS.COM™, TorchTools™, BIBOW DESIGN GROUP & BIBOW INDUSTRIES, INC.™
All materials, All content may NOT be published, broadcast, rewritten, redistributed, rebroadcast or publically disseminated in any manner whatsoever. ALL RIGHTS RESERVED
U.S. Patent Numbers 6,976,502, 7,588,276, 8,371,629 & Other Patents Pending