PayPal Acceptance Mark

WWW.TORCHTOOLS.COM
U.S. Patent Numbers 6,976,502, 7,588,276, 8,371,629, 9,027,785 & Other Patents Pending

In Loving Remembrance
Warren A. Bibow
5/30/1932 - 8/7/2017  

      SSL

Search by part number: VICTOR®, TurboTorch®, Uniweld®, GOSS®, Harris®, Smith®, GENTEC®, Worthington®, Lenox®, ESAB®
 or search by expression: welding tips, air acetylene kits, torch handles...
 

Home
Plumbing HVAC Equipment
B-Tank Tools
B-Tank Handles
B-Tank Organizer
B-Handle Hooks
B-Tank Holder
Steel Tank Holders
B-Tank Regs
MC-Tank Tools
MC-Tank Organizer
MC-Tank Holder
Reg Upgrade Kits
Elite Prem Air Fuel Kits
BEBO Elite Air Acet Torch Kits
BEBO Premium Air Acet. Torch Kits
KA14BSP
KA11BSP
KA8BSP
KA5BSP
KASL5BSP
KASL8BSP
KASL12B
KA8MC-TSP
KA8MCSP
KA5MCSP
KASL5MCSP
KASL8MCSP
HGA-012A
Air Acetylene Tips
Swirl Flame Quick-Connect Tips
6Q-2TA
6Q-3TA
6Q-3TAC
6Q-5TA
6Q-8TA
6Q-11TA
6Q-14TA
5TEA
Air-Acetylene Auto Ignite Tips
6Q-3TASL
6Q-5TASL
6Q-8TASL
6Q-12TASL
Air Acet Screw-Connect Swirl Flame Tips
7S-3TA
7S-5TA
7S-8TA
7S-11TA
Air Acet Soft Flame Quick Connect Tips
6Q-1SA
6Q-2SA
6Q-3SA
6Q-4SA
6Q-5SA
6Q-6SA
Soft Flame Screw Connect Tips
7S-1SA
7S-2SA
7S-3SA
7S-4SA
7S-5SA
7S-6SA
KPSL3SP
KPSL4SP
KPSL5SP
Air MAPP Quick-Connect Swirl Flame Tips
HGP-012
6Q-2TP
6Q-3TP
6Q-4TP
6Q-5TP
6Q-6TP
Air Propane Quick-Connect Tips
Air Propylene Quick Connect Tips
Air MAPP Screw Connect Tips
7S-2TP
7S-3TP
7S-4TP
7S-5TP
8Q-44TP
KP4SP
KP5SP
KP6SP
Air MAPP Torch Kits
Air Propane Torch Kits
BBQ Propane Torch Tools
Air-Propane Auto Ignite Tips
6Q-3TPSL
6Q-4TPSL
6Q-5TPSL
Air-MAPP Auto Ignite Tips
Air Propane Screw-Connect Tips
Air MAPP Tips
Air Propane Tips
Air Gas Torch Handles
Air Acetylene Torch Handle
Air Propane Torch Handles
Air MAPP Torch Handles
7LBS MAPP Tank Torch Tools
Swivel Torch Kit
KPSL3SW-FSP Swivel Torch
KPSL4SW-FSP Swivel Torch
KPSL5SW-FSP Swivel Torch
Hand Torch Belt Clip
Nitrogen Carry Handles
Nitrogen Tank Tools
Nitrogen Tank Holders
Nitrogen Purge Tools
C02 Tank Tools
C02 Purge Tools
Oxygen Tank Tools
Oxygen Tank Carry Handles
Hand Torches
Nitrogen Purge Kits
N2 Tire Inflation Kits
GKNT
GKNT-NT
GKNT20-T
GKNT40-T
GKNT20-NT-C
GKNT20-TC
GKNT40-NT-C
GKNT40-TC
AirCraft Tire Inflation
Nitrogen Aircraft Tire Inflation
HVAC Oxy-Acet Torch Kits
GF11
GF22
HVAC Oxy-Fuel Torch Kits
KA30MC
KA30MC-T
KA30MC-TC
KM50-T
KP50-T
KA50
KA50-T
KA50-TC
KA51
KA51-T
CRT10
Totemate
Plg HVAC Regs
Plbg HVAC Access
Welding Equipment
Welding Regs
Air Regulators
Oxygen Regulators
Acetylene Regulators
Methane Regulators
Propane Regulators
LP Regulators
Hydrogen Regulators
Nitrogen Regulators
Butane Regulators
C02 Regulators
Argon Regulators
Helium Regulators
Insert Gas Regulators
Other Gas Regulators
Gauge Protected Regulators
Gauge Protectors
Station, Pipeline, Manifold, Flow Gauge, Flow Meter, Balloon Gas Regulator
Reg. Inlets & Outlets
CGA ADAPTERS
Pressure Gauges
G20 Gauges
G20B Gauges
Compact Torch
KCMA16TCSP
KCMA16SP
KCMA16-BSP
KCMP16SP
KCMA26SP
KCMA04SP
Compact Tips
10CMP 3-7
10CMP-GMTT
10CMP-GMTR
Jewelry Torches
Jewelry Tips
Glass Blowing Tips
Jewelry Torch Kit Components
Glass Blowing Kit Components
Small Torch Kits
Small Torch Components
Small Torch Tips
Mul-T-Torch
WB-500T
ICE MELTING TORCH
Snow Melting Torch
Check Valves
24-CV5PR
24-CV5TO
24-CV5TF
24-CV7PR
24-CV7TO
24-CV7TF
24-CV8PR
24-CV8RO
24-CV8RF
24-CV9PR
24-CV9RO
24-CV9RF
FlashBack Arrestors
FA5TPR
FA7TPR
Quick Connectors
KOIKE Quick Connectors
Hose-To-Torch
QC-HTPR
QC-HTF
QC-HTX
QC-HTF-M
QC-HTF-F
QC-HTX-M
QC-HTX-F
Regulator-To-Hose Quick Connectors
QC-RHPR
QC-RHF
QC-RHX
QC-RHF-M
QC-RHF-F
QC-RHX-M
QC-RHX-F
Hose-To-Hose Quick Connectors
QC-HHPR
QC-HHF
QC-HHX
QC-HHF-M
QC-HHF-F
QC-HHX-M
QC-HHX-F
Gold Torch Kits
1120 Jobber Torch
1120FA Jobber
1121 Jobber II Torch Kit
1121FA Jobber Torch Kit
1138 Iron Horse Torch Kit
1138FA Iron Horse Torch Kit
1130 Commander Torch Kit
1130FA Commander Torch Kit
1131 Commander II Torch Kits
1131FA Commander II Torch Kit
4121 Excalibur Torch Kit
4121FA Excalibur Torch Kit
4131 Boss Torch Kit
4131FA The Boss Torch Kit
Tote-A-Torch Kits
12PT Tote-A-Torch
12PTC Tote-A-Torch Kit
Silver Torch Kits
Packaged Welding  Cutting Torch Kits
Scrapper Cutting Torch
13-OS Torch
63L-4 Torch
63L-5 Torch
63L-4 / 63L-5
ScrapMaster Cutting Torch
Gas Savers
100QF-Y Gas Saver
100QF-F Gas Saver
Torch Handles
140T
141T
142T
143T
143TL
143TLH
342T-Y
342T-F
442T
443T
140T Parts
141T Parts
141TA Parts
142T Parts
142TA Parts
143T Parts
143TL Parts
143TLH Parts
161S Parts
162 Parts
163 Parts
Cut Attachments
141C
142C
143CA
143ACA
143SCA
442C
443C
Hand Cutting Torches
161S-17
162S-17
Sm. Weld Cart
Lg Weld Cart
Heating Nozzels
171H Nozzles
171H-2
171H-4
171H-6
172H Nozzles
172H-2
172H-4
172H-6
172H-8
173H Nozzles
173H-4
173H-6
173H-8
173H-10
173H-12
173H-15
871H-873H Nozzles
871H Nozzle
872H Nozzle
873H Nozzle
171HN-173HN Nozzles
171HN Nozzle
172HN Nozzle
173HN Nozzle
175HN Nozzle
Welding Tips
Uniweld 71 Tips
Uniweld Type 17
171W Tips
171W-000
171W-00
171W-0
171W-1
171W-2
171W-3
171W-4
171W-5
171W-6
172W Tips
172W-000
172W-00
172W-0
172W-1
172W-2
172W-3
172W-4
172W-5
172W-6
173W Tips
173W-000
173W-00
173W-0
173W-1
173W-2
173W-3
173W-4
173W-5
173W-6
173W-8
173W-10
871W Elbows
872W Elbows
873W Elbows
472W Elbows
172WRTEN
173WRTE Nozzle
173WTREN
Special Braze Nozzles
GMTW
GMTW-1
GMTW-2
GMTT
GMTR
G17-VMA-1
G17-FT Tip
G13-8VM
G17 Multi Gas Nozzles
881W-883W Elbows
881W
881W-TT
882W
883W
Gas MIXERS
871M, 872M, 873M Mixers
871M Mixer
871M-7 Mixer
872M Mixer
872M-7 Mixer
873M Mixer
873M-4 Mixer
873M-6 Mixer
873M-10 Mixer
883TE Tip Ends
883TE-00
883TE-0
883TE-1
883TE-2
883TE-3
883TE-4
883TE-5
883TE-6
00-TE VICTOR
0-TE VICTOR
1-TE VICTOR
2-TE VICTOR
3-TE VICTOR
4-TE VICTOR
5-TE VICTOR
6-TE VICTOR
883TEMFA Tip Ends
883TEMFA-1
883TEMFA-2
883TEMFA-3
883TEMFA-4
883TEMFA-5
883TEMFN-5
VICTOR 5-TEMFN
1-TEMFA
2-TEMFA
3-TEMFA
4-TEMFA
5-TEMFA
VICTOR TEN Tip Ends
VICTOR 0-TEN
VICTOR 1-TEN
VICTOR 2-TEN
VICTOR 3-TEN
VICTOR 4-TEN
VICTOR 5-TEN
VICTOR 6-TEN
VICTOR 8-TEN
883TEN Tip Ends
Cutting Tips
VICTOR 1-101
172C Tips
173C Tips
VICTOR 3-101
Gentec 172C
VICTOR 3-GPN
172CN
VICTOR 0-3-GPP
VICTOR 1-3-GPP
VICTOR 2-3-GPP
VICTOR 3-GPP
172CP
173C
VICTOR GPN
173CN
VICTOR GPP
VICTOR 00-GPP
VICTOR 0-GPP
VICTOR 1-GPP
VICTOR 2-GPP
VICTOR 3-GPP
VICTOR 4-GPP
173CP
VICTOR GPM
VICTOR 0-GPM
VICTOR 1-GPM
VICTOR 2-GPM
Gentec 173CM
173CM-0
173CM-1
173CM-2
VICTOR Scarfing Gouging Tips
VICTOR 2-3-118
VICTOR 0-1-118
VICTOR 2-1-118
VICTOR 4-1-118
VICTOR 2-1-234
Gentec Scarfing-Gouging Tips
172CG-2
173CG-0
173CG-2
173CG-4
173CGN-2
VICTOR High Speed Machine  Cutting Tips
VICTOR MTHP Cutting Tips
Uniweld MTHP Cutting Tips
VICTOR MTHN Cutting Tips
Gentec High Speed Machine Cutting Tips
173CHP
173CHN
HS Cutting Tips
Harris 6290
6290-000
6290-00
6290-0
6290-1
6290-2
6290-3
6290-4
6290-5
6290-6
472C
472C-000
472C-00
472C-0
472C-1
472C-2
472C-3
472C-4
472C-5
472C-6
HARRIS 6290NX
6290NX-000
6290NX-00
6290NX-0
6290NX-1
6290NX-2
6290NX-3
6290NX-4
6290NX-5
6290NX-6
472CN
472CN-000
472CN-00
472CN-0
472CN-1
472CN-2
472CN-3
472CN-4
472CN-5
472CN-6
Harris 6290-VVC
6290-0 VVC
6290-1 VVC
6290-2 VVC
6290-3 VVC
6290-4 VVC
144 164 Concoa Airco Tips
144 Concoa AIRCO Cutting Tips
164 Concoa AIRCO Cutting Tips
672C Cutting Tip
673C Cutting Tips
KOIKE AIRCO High Speed Machine Cutting Tips
107D7 KOIKE AIRCO Cutting Tips
106D7 KOIKE AIRCO Cutting Tips
672CHN
673CHNP
Smith Cutting Tips
572C Cutting Tips
572CN Cutting Tips
573C Cutting Tips
ESAB 4202 Cutting Tip
Purox 16K Cutting Tip
Uniweld 4202
772C Cutting Tips
4202-2 PUROX
4202-4 PUROX
4202-6 PUROX
Machine Torches
MC300
MC200
MC100
EZ Arc Positioners
Positioners
Welding Hoses
Hose Fittings, Ferrules, Braces
Welding Accessories
Arc Welding Accessories
Ballon Filler Regulators
Ballon Reg Parts
Scuba Tank Handles
02-Mate
New Product
U.S. Military Services
Torch Repair
Gentec Catalogs
PRIVACY POLICY
DISTRIB. TERMS
About Us
TradeShows
Contact US
Special Orders
Terms Of Use
SEARCH
Site Map

-NEW PRODUCT NEWS-

 

             U.S. Patent RECEIVED!

5/12/2015

Bibow Industries, Inc. - the industry pioneer and market leader in ergonomic tank carry handle and torch organizing equipment announced today that they received U.S. Patent # 9,027,785 for their vehicle Tank Holders: Acetylene B-Tanks, MC-Tanks, Nitrogen Tanks, Oxygen Tanks - ALL industrial and medical gases transported by vehicles.

"We are overjoyed that USPTO granted us another patent and we are grateful that contractors and end users everywhere see the incredible value and safety in another one of our products.  Most notable are the reports we are hearing from contractors that they are demanding their vehicle insurance companies lower their insurance premiums by 20-30% since "RISK" of potential fire and explosion hazards from transporting hazardous gases is greatly reduced" stated Chris Bibow, Co-Founder.  Continuing, "one contractor told us that they bought and installed the B-Tank and Nitrogen tank holders, installed them, inserted the takes, torqued down the RED "T" handles thereby locking the gas cylinder or tank into the holder and then had their insurance agent stop by, climb into his van and try to PULL the tank out of the holder... Impossible... The agent realized how big and strong and safe the tank holders where, and the added safety of the T handle to lock down and in the tanks.   Needless to say, RISK was greatly reduced, and vehicle insurance premium needed to reflect this fact.  A great story.  Adding, "we believe that D.O.T, O.S.H.A and Highway Transportation board and HighWay Safety Commissions should demand that our patented vehicle gas tank holders be the "industry safety standard" and law throughout the United States because if how much risk this product reduce and how much safer ALL drivers would be...  It's NOT just about the safety of the contractor or the worker or the person driving the truck, van or service vehicle, or the business owner looking to reduce their risk, - but it's about the safety of the other cars, their drivers and their passengers in those vehicles" - explained Chris.  "I have a family and children and I think about their safety and about how I see industry problems and what I can do to solve them for the betterment of everyone, just like we did with patented tank carry handles and patented gas regulators with tank carry handle technology.  Hopefully, for the sake of our safety, our children's' transportation safety we can get our patented tank holders to become national law!

////////////////////////////////////////////
3/26/2013

Bibow Industries, Inc. - the industry pioneer and market leader in ergonomic tank carry handle and torch organizing equipment announced today their NEW Ultimate B-Tank Holders (PATENT PENDING) - specifically built for all Acetylene B-Tanks.

Christopher Bibow, Co-Founder of Bibow Industries explained:

"we spoke with dozens and dozens of contractors during our R&D process about their vehicle tank-holder needs. After reviewing the data, all the notes, the same key issues kept appearing.  No manufacturer offered a robust, ultra-strong, full featured, integrated tank holder system that offered both stand alone and multi-tank repositories "holders" with limited attachment holes (without compromising safety) - to prevent excessive hole drilling in trucks, vans, and the other service vehicles.  Chris continued to explain, "we made these new tank holders entirely out of 3/16" or 1/4" thick steel, over welded it, and went with the best paint on the market RUST-OLEUM®!   Contactors kept complaining about how the current tank holders were all made out of cheap, very thin steel 1/16" or so and that they would not hold up from daily use and would wear out and break, especially at the holder attachment points - usually the feet of the holders..."  Continuing "contractors also complained that the current holders on the market would rust from wear and tear and could not be easily maintained and/or color-matched and painted.  We heard the market loudly!"  The answer: 3/16" or 1/4" steel plate, make it last and super safe... and use the best rust resistant paint on the market RUST-OLEUM®, that is widely available at any HomeDepot®, Lowe's® or Box warehouse, Hardware store... so contractors could easily respray or touch up any scratches or scrapes that come with use...  Chris louded stated, "let's fact it, the tank holders get the hell beat out of them by the tanks, they need to last, they need to be SAFE and easy to maintain!"   "In our engineering processes, we also solved contractors fears if their trucks ever tipped over or fell over.... that the tank would not fall out of the holders... Since
acetylene, MAPP
® and other industrial gases are explosive and cause fear in the back of contractor's minds, we wanted a system to allow contractors to quickly secure the tanks to the sidewalls of the tank holders as soon as they placed them in the holders.. The integrated locking T handles allow contractors to quickly add enough pressure to lock the gas cylinder (B-Tank, MC-Tank Nitrogen Tank) into the holder(s) so they cannot fall out.    Lastly, we thought that marine grade stainless steel through-bolts or high chrome steel bolts with large fender washers and aircraft grade nylon nuts would round out the tank holders securement systems!  Contractors are already asking their vehicle insurance agents for premium reductions because of RISK being lessened with the proper installment and use of the tank holders.  

Ultimate B-Tank Holder:

BEBO Ultimate B-Tank Holder for Van, Truck, Vehicle = $65 +  $15 S&H Insurance

Bibow Industries’ PATENTED 9,027,785 Acetylene B-Tank Holder of trucks, vans and all vehicles.   

Made from 3/16" mild steel.  This Ultimate B-Tank Holder is FULLY welded and has 4+ holes for through bolts attachment to vehicle’s floor.  B-Tank holder is engineered with channels or troughs on the bottom to allow for condensation, water or gas to escape.  SAFETY – the patented acetylene B-Tank holder contains a locking red "T" handle to purposefully enable users to “LOCK” the acetylene B-Tank into B-Tank holder - all with a simple Twist.  Constructed from rigid steel to exceed ALL D.O.T. and O.S.H.A Type 2 gas holder requirements.  Painted with RUST-OLEUM® “BECAUSE RUST SUCKS!©™”  Purposefully engineered to last a lifetime!

 

  • Prevents Acetylene B-Tanks from rolling around, shifting in truck, van or vehicle
  • Holds Acetylene B-Tanks in vertical, upright position - D.O.T compliant
  • 3/16" steel bottom plate with 4+ through-bolt attachment holes - locks holder into vehicle
  • 3/16" steel bottom plate takes "TANK IMPACT", NOT the floor of vehicle
  • 3/16" steel B-tank receiving section
  • Masterfully welded together
  • Threaded locking RED "T" Handle to lock the B-Tank into the Holder - tank can't fall out
  • Weighs over 6 lbs
  • Empowers contractors, end users to DEMAND vehicle insurance premium REDUCTION!
  • RUST-OLEUM® – “BECAUSE RUST SUCKS!©™

RUST-OLEUM® is a registered trademark of the  RUST-OLEUM Corp. and is not associated with Bibow Industries, Torchtools, nor Genstar Technologies. 
We proudly use RUST-OLEUM® paint because it is the BEST!

 

Third Party Trademark & Brand Notice

* Equivalency data: 2008 - 2014 Gentec HVAC, Plumbing, Welding Catalogues

Contact sales@torchtools.com or call us at (516)-695-5696 Mon - Fri 7am - 5pm NY EST

Hit Counter


PayPal Acceptance Mark
 
SSL

Terms Of Use   Privacy Policy  Third Party Trademark & Brand Notice   Site Map
<script type="text/javascript" src="https://cdn.ywxi.net/js/1.js" async></script>


Listed 3rd party registered trademarks and trademarks are property of their trademark and copyright owners and are not associated with WWW.TORCHTOOLS.COM, Bibow Industries Inc., or Genstar Technologies and any and all subsidiaries thereof.  Please see 3rd party trademark, brand notice.
 * or "=" or " = to" means "equivalent to" and/or "compatible to" as determined by Genstar Technologies and not WWW.TORCHTOOLS.COM or Bibow Industries, Inc.
"=" equivalent to (and/or) compatible to: sources from public Gentec product catalogues and www.genstartech.com
Gentec part # = competitor torch manufacturer part # © ™ 2004-2014
= to © ™ Bibow Industries, Inc. TORCHTOOLS 2003-2014
ALL RIGHTS, ALL TRADE DRESS, ALL COLOR SCHEMES RESERVED 2003-2014 © ™
Copyright © 2003-2014 WWW.TORCHTOOLS.COM™, TorchTools™, BIBOW DESIGN GROUP & BIBOW INDUSTRIES, INC.™
All materials, All content may NOT be published, broadcast, rewritten, redistributed, rebroadcast or publically disseminated in any manner whatsoever. ALL RIGHTS RESERVED
U.S. Patent Numbers 6,976,502, 7,588,276, 8,371,629 & Other Patents Pending