Nitrogen Purge Kit Tools
Nitrogen Tank Carry Handle™
PREVENT
CARPAL TUNNEL / ARTHRITIS!™
 +
=
 =
Patent Numbers 6,976,502 & 7,588,276
Form, Safety,
Functionality, Economic$
20CFNTH
20 Cubic Foot
Nitrogen Tank
Holder
NTH468CF
40, 60, 80 CF Nitrogen Tank Holder
FORM:
-Perfect Tank Handle Placement for optimal balance™
-UNIVERSAL: Works with ALL Nitrogen Regulators: Gentec®, TurboTorch®, Victor®,
Harris®, ESAB®, Uniweld®, etc.™
-Stops excessive Regulator wear damage - no more carrying tank by
regulator body™
SAFETY
-Ergonomic Tank Carry Handle™
-Makes hand-carrying
Nitrogen-Tanks
with the regulator easier & safer!™
-Made from Aircraft grade 6061 Aluminum, NOT PLASTIC
-Wide ergonomic grip for BIG HANDS™
-Reduces climbing risk when ascending, descending ladders, stairs, etc™
FUNCTIONALITY:
-Simple to install, use, transfer from tank to tank™ /
regulator-to-regulator™
-Makes pulling
Nitrogen-tanks
out of / putting tanks into vehicle tank holders EASIER!™
-IF regulator FAILS, easy swap out, NO dependencies on poor equipment™
-Perfectly ergonomically balanced for your hands, arms, neck, back, and body™
-Chiropractors FULLY support function and ergonomic benefits™
-Proven to reduce Hand, Arm, Shoulder, Neck, Back, and Leg Fatigue, PAIN &
Injury™
ECONOMIC$
"What are your Hands Worth?"
|
Nitrogen Purge
and Blow Gun Kits:
GENTEC Nitrogen Purging and
Blow Gun Kits include a chrome-plated compressed air blow gun with
Standard Safety Tip and solid brass internal parts. The blow gun is
lightweight and designed to fit comfortably in the user’s hand. It
complies with OSHA 1910.242b and 1910.95 which require that compressed
air be limited to 30 PSI at the nozzle outlet. The safety tip includes a
safety by-pass which prevents excessive pressure build-up in the gun if
the nozzle becomes clogged. Accessories, such as high or low-pressure
regulators, blow gun hose, standard safety tip, rubber tip for blowing
out lines and 6” extension needle tip are available. GENTEC Nitrogen
Purging and Blow Gun Kits include choices for high-pressure regulators
for Nitrogen and carrying cases for 20 or 40 cu. ft. cylinders.
|
GKNP
+ Nitrogen Tank Handle =
Organized Solution |
|
MODEL# |
TANK |
CYLINDER
CARRYING CASE |
COMPONENTS |
GKNP20-TC
|
CY20-580
20 cu.ft. Tank, empty |
CRT20N |
GKNP
-
HBG-6 Blow Gun Hose (6')
-
B306 OSHA Rated Blow Gun with Safety Tip
-
452IN-450 Nitrogen Regulator
|
GKNP20-T
|
- |
CRT20N |
GKNP40-TC
|
CY40-580
40 cu.ft. Tank, empty |
CRT40N |
GKNP40-T
|
- |
CRT40N |
|
|
|
|
452 NITROGEN & CO2
Purging Series Regulators
Regulators
are designed for purging/pressure testing with Nitrogen ("IN" series) or
Carbon Dioxide ("C" series).
- 2" Gauge and 2-3/4"
diaphragm
- Stem type seat
assembly for more reliable seating
- Forged brass body
- Chrome-plated
housing cap
- Self re-seating
external pressure relief valve
- Sintered bronze
inlet filter
- UL Listed
|
MODEL #
|
GAS SERVICE |
MAX. INLET PRESSURE (PSI) |
MAX. DELIVERY PRESSURE (PSI) |
INLET GAUGE |
OUTLET GAUGE |
INLET CONNECTION |
OUTLET CONNECTION |
|
Carbon Dioxide |
452C-300-F
|
3000 |
20-300 |
2", 4000PSI |
2", 400PSI |
CGA 320 |
1/4" SAME Flare |
|
Nitrogen |
452IN-300-F
|
3000 |
20-300 |
2", 4000PSI |
2", 400PSI |
CGA 580 |
1/4" SAME Flare |
452IN-450-F
|
3000 |
30-450 |
2", 4000PSI |
2", 600PSI |
CGA 580 |
1/4" SAME Flare |
1
psi = 0.00689 MPa = 6.895 kPa = 0.06895 bar =
0.07 kgf / cm2,
1 SCFH = 0.0283 m3/h = 0.472 LPM
|
|
|
|
NITROGEN TANK CARRY STANDS
 
CRT20N
CRT40N
Consider a Nitrogen Tank Carry Handle
+
=
It's
lighter to carry!
(SCROLL UP)
NITROGEN PURGE KIT ACCESSORIES
-Blow Gun Hose-
HBG-6
Nitrogen Blow Gun W/ Safety Tip ¼” F Inlet, 1/8”
B306
BT6S
Standard safety tip (used
on B300)
BT2
Rubber Tip for flowing-out lines (used on B300)
6-inch Nitrogen
Blow Gun Extension Tip
BX6
Nitrogen Tanks
CY20-580
CY40-580
20-CF
Nitrogen Tank 40-CF Nitrogen Tank
Third Party Trademark & Brand Notice
* Equivalency data: 2008 - 2014 Gentec
HVAC, Plumbing, Welding Catalogues
Contact
sales@torchtools.com
or call us at (516)-695-5696 Mon - Fri 7am - 5pm NY EST
| 
